Curtain lights have to fit a three-dimensional route: across the top, down the window and back to power. Measuring glass width alone misses the header, cable lead and moving parts of blinds or curtains.
Measure the full display rectangle
Make a paper installation plan before attaching lights. Use only fixing and electrical methods allowed by the product and the surface.
Record the width between intended top anchors and the desired drop to the lowest light. Then measure the space above the frame for hooks or supports. Note handles, locks and trim that project into the plane of the lights.
- Top span
- Measure anchor to anchor, not simply edge of glass to edge of glass.
- Vertical drop
- Check every drop against sill, radiator, furniture and floor.
- Lead cable
- Trace from the light set to an approved power point along a supported route.
- Controller position
- Keep it accessible without hanging where it can strike glass.
- Opening path
- Operate the window and coverings through their full normal travel.
Test window and curtain movement
Tape lengths of string or paper strips at the proposed positions. Open the window, pull curtains and raise blinds. Anything that catches the mock-up may catch a light strand or cable later.
| Question | What to do |
|---|---|
| Can the window latch? | Keep lights and wire away from closing surfaces. |
| Can blinds rise fully? | Check cords, slats and headrail without entanglement. |
| Do curtains glide? | Leave clearance so fabric does not drag the strands. |
| Is the outlet route safe? | Avoid doorways, pinch points and unsupported cable spans. |
Compare dimensions with the product
Test the window opening path before hanging lights
Use the The LED Net Curtain Fairy Lights page for current width, drop and power details, then compare with the measured route. Do not infer dimensions from a styled photograph.
Mark anchors before unpacking fully
Transfer the plan to removable tape and confirm spacing visually. A complete mock-up exposes a poor fit while the set is still organized and before any attachment method is committed.